I took the free 2011 DLC pack with the classic bale equipment and got them into 2013 but have run into a huge problem..
The smaller bales that these wagons use do not exist in 2013 and I do not have 2011 to borrow them from. Is it possible for someone to lend me a copy of the .i3d files for them?
<baleType fruitType="wheat" filename="strawbaleBalerSmall.i3d" />
<baleType fruitType="barley" filename="strawbaleBalerSmall.i3d" />
<baleType fruitType="dryGrass" filename="haybaleBalerSmall.i3d" />
With these i3d's missing is fills up the baler one time and continues to eat straw, but fails to ever produce a visible bail for later use. I attempted to convert it over to the newer (and larger) square bales like the big Krone uses, but it was a total mess... It filled up the bailer repeatedly while failing to give visible bails, eventually the bailer ceased filling but continued to eat straw. Once that happened it lagged the game to all hell and nearly froze.
Thanks in advance,
~Dark
PS: It just dawned on me, is there possibly a non-working (in 2013) eject key to launch bails from the bailer?
FS2011 Free DLC pack conversion help?
9 posts
Page 1 of 1
Re: FS2011 Free DLC pack conversion help?
Actually, those i3d files ARE included with the dlc, you just need to look again. I tried converting the baler myself and it doesn't want to produce any bales and I have yet to look into why. As for your last question, no there isn't, it should produce bales as it creates them and they should automatically drop from the baler when it's far enough out.
Andy
Andy
Re: FS2011 Free DLC pack conversion help?
Think I found the problem, in the fahrAPN.xml it is looking for these files as noted above:
<baleTypes>
<baleType fillType="wheat_windrow" filename="data/maps/models/objects/strawbale/strawbaleBaler.i3d" />
<baleType fillType="barley_windrow" filename="data/maps/models/objects/strawbale/strawbaleBaler.i3d" />
<baleType fillType="dryGrass_windrow" filename="data/maps/models/objects/strawbale/haybaleBaler.i3d" />
</baleTypes>
What I found since you mentioned they are in the mod (which I never thought to look in beyond the xml files) are these files:
haybaleBalerSmall.i3d
strawbaleBalerSmall.i3d
Going to change over what its looking for and give it a shot, have to pick my daughter up from school before I will get the chance to test it however...
~Dark
<baleTypes>
<baleType fillType="wheat_windrow" filename="data/maps/models/objects/strawbale/strawbaleBaler.i3d" />
<baleType fillType="barley_windrow" filename="data/maps/models/objects/strawbale/strawbaleBaler.i3d" />
<baleType fillType="dryGrass_windrow" filename="data/maps/models/objects/strawbale/haybaleBaler.i3d" />
</baleTypes>
What I found since you mentioned they are in the mod (which I never thought to look in beyond the xml files) are these files:
haybaleBalerSmall.i3d
strawbaleBalerSmall.i3d
Going to change over what its looking for and give it a shot, have to pick my daughter up from school before I will get the chance to test it however...
~Dark
Last edited by Darksiede on Sat Nov 03, 2012 12:06 am, edited 1 time in total.
Re: FS2011 Free DLC pack conversion help?
well, scratch that, actually got a quick test in and it still failed.. Ive also noticed since working on this mod I cannot exit game normally, when I click on exit it crashes out with an error log, will investigate farther this evening..
~Dark
~Dark
Re: FS2011 Free DLC pack conversion help?
After you do the basic conversion, you need to open fahrAPN.xml
Search for the call fruitType
Change it to fillType
FruitTypes is no longer used in 2013 this way. Leave Fruit types alone anywhere else you find it, however. Just those three is all you need.
Then open ParticleSystemShader.xml. Change customShader version from, 1 to 2:
After that, should work fine. The conveyor script it a little off, so the animation is shifted some, but barely noticeable. I tested this on my system, worked like a charm.
If you want to make the brand logo show up in the Store screen, that's easy to do too. Just change this:
to this:
Search for the call fruitType
Code: Select all
<baleTypes>
<baleType fruitType="wheat" filename="strawbaleBalerSmall.i3d" />
<baleType fruitType="barley" filename="strawbaleBalerSmall.i3d" />
<baleType fruitType="dryGrass" filename="haybaleBalerSmall.i3d" />
</baleTypes>
Code: Select all
<baleTypes>
<baleType fillType="wheat" filename="strawbaleBalerSmall.i3d" />
<baleType fillType="barley" filename="strawbaleBalerSmall.i3d" />
<baleType fillType="dryGrass" filename="haybaleBalerSmall.i3d" />
</baleTypes>
Then open ParticleSystemShader.xml. Change customShader version from, 1 to 2:
Code: Select all
<CustomShader version="2" classRequirement="">
If you want to make the brand logo show up in the Store screen, that's easy to do too. Just change this:
Code: Select all
<image active="store_fahrAPN.png" />
Code: Select all
<image active="store_fahrAPN.png" brand="$data\vehicles\brand_fahr.dds" />
Re: FS2011 Free DLC pack conversion help?
You are so awesome Staalker
Andy
Andy
Re: FS2011 Free DLC pack conversion help?
Hell yes, thank you Staalker.. Working on fixing it proper now.. This helps immensely with my goal of running an oldschool farm with older & smaller equipment...
~Dark
~Dark
- bassaddict
- GIANTS Software | Web/Script Programmer
- Posts: 11983
- Joined: Tue Nov 29, 2011 2:44 pm
- Location: ER, DE
Re: FS2011 Free DLC pack conversion help?
No, should not. Converting a shader is more then just changing that value and in most cases you'll get errors in your LOG file. But since this shader comes with the game, you just have to replace it with the one from the installation directory.Staalker wrote:Then open ParticleSystemShader.xml. Change customShader version from, 1 to 2:
After that, should work fine.Code: Select all
<CustomShader version="2" classRequirement="">
Re: FS2011 Free DLC pack conversion help?
Yes, converting a shader is more than just changing that value.bassaddict wrote:No, should not. Converting a shader is more then just changing that value and in most cases you'll get errors in your LOG file. But since this shader comes with the game, you just have to replace it with the one from the installation directory.Staalker wrote:Then open ParticleSystemShader.xml. Change customShader version from, 1 to 2:
After that, should work fine.Code: Select all
<CustomShader version="2" classRequirement="">
However, in this case it works because the shader in the mod is actually fine, the game calls an error because the xml file says it's version 1 and not 2.
I was not in any way suggesting this worked for any other mod than this one. It works here, I tested it, and it returned no warnings or errors.
In this exact case only, the instructions I gave work fine. It should work fine.
9 posts
Page 1 of 1